1. Identify the front and rear of your cover: the front is marked "FRONT", and the rear has a loop sewn into the hem.
2. Place the loop around the license plate or any other object protruding from the rear of your vehicle. You can also place your loop inside the trunk, which you should THEN close to secure.
3. Next, cover you vehicle from back to front, securing firmly and evenly over the front and rear bumpers. Be sure to secure your cover with grommets and the Cable & Lock kit.

We recommend spot washing your cover with diluted mild detergent in cold or lukewarm water.

Your cover can also be machine washed-- however, you must use a front load triple commercial washer with cold water, 1/4 cup mild liquid laundry detergent. RINSE THOUROUGHLY. NEVER PUT YOUR COVER IN A DRYER. Line or air dry your cover.

1. Begin covering your vehicle with the cover you purchased, but stop at the antenna.
2. Mark the spot on your cover.
3. Apply the adhesive-backed antenna patch to that spot (on top of the cover) then cut a hole smaller than the diameter of the perforated hole of the antenna patch for your antenna to come through.

Grommets should be used in conjunction with the Cable & Lock kit to secure your cover during high winds or storms, or for long periods of time.

Your Grommets come as two separate pieces that lock together. There is a male piece and a female piece. You will snap the grommets together through the cover material, which requires some force. To accomplish this, you may need to use a pair of wrenches, although it is possible to do without. We have illustrated instructions available upon request.

1. Identify the male and female parts of your grommet.
2. Position the male grommet part on the inside of your cover, and the female part of your grommet on the outside of your cover, leaving a small excess of cover material between the two.
3. Using a good amount of force, snap the two pieces together. You may need to use a pair of wrenches (one to stabilize, one to apply force) in order to accomplish this, although it is possible to snap them together without using any tools.
4. Once the grommet pieces have snapped securely together, puncture the cover material with scissors or a sharp edge, being sure to leave some of the cover material around the wall of the male part of the grommet.
5. Repeat as necessary with any additional grommets you wish to install. To use with a Cable & Lock Kit, you will need to install grommets as PAIRS, and loop the Cable & Lock Kit through each grommet hole.

Click here to View our Simple Grommet Instructions (PDF).

1. Spun-Bond Polypropylene: A space-age material perfect for car protection, this ultra lightweight and yet weather resistant material is one layer of non-abrasive synthetic fibers.
2. SFS (Spun-Bond Polypropalyne, Film, Spun-Bond Polypropalyne): A breathable, 3-layer material that has been UV treated. A soft interior layer prevents scratches and abrasion. We offer different grades of SFS materials for different environmental applications.
3. Endura-Plus: A non-abrasive, water-resistant, 3-layer fabric, with high sun, rain, and dust protection. Double-stitched seams and extra thick, breathable material provide strong water-resistance.
4. DuPont Tyvek™: An Ultra-lightweight, super soft material with very high sun resistance and double stitched seams. Made in the USA by DuPont, the Tyvek material is completely recyclable and will keep your vehicle up to 30 degrees cooler in the hot sun.
5. Polyester: A high quality, breathable, and durable material with superior sun, rain, and snow resistance with double stitched seams to ensure long-life.
6. Nylon: Nylon by definition is a tough yet lightweight synthetic material that was developed as a replacement for silk. We use high-quality nylon with superior sun, rain, snow and dust protection and double-stitched seams to ensure long life and durability.
7. TAFFETA: A strong woven material that has been UV treated for weather resistance. This anti-static material provides non-abrasive, almost silky car protection.

If you bought an Empire Product, you can easily register your warranty by filling out the warranty sheet that was shipped with your item and mailing it to the manufacturer, or by visiting the manufacturer's website.

For all Lloyd Products you do not need to register to claim your warranty.

To claim your warranty on a Lloyd Mats product, excluding the Heavy Plush Mat, contact us directly and we will process any warranty issues for you. A mat which exhibits defects in design, workmanship or materials during the time of your specific warranty is eligible for a warranty replacement claim. In the rare case where Lloyd would need the mat back, a call tag would be sent to you. If there is a problem with fit, it is recommended that the customer provide a photograph along with their warranty claim.

If you purchased a Heavy Plush Mat, you would need to contact Lloyd Mats if there were defects in design, workmanship, materials or if the mats wear through the backing during the 10 year warranty period.

Warranty Length varies depending on the product. Below is a list of products we sell and the warranties that are offered:

• American Armor: 5 Years
• Titan Quatro 4L Cover: Lifetime
• The Max Cover: Lifetime
• The Ultimate Indoor Cover: 10 Years
• The Empire Waterproof: 10 Years
• DuPont Tyvek ® Sunproof Cover : 5 Years
• The Empire Deluxe: 5 Years
• The Empire Standard: 3 Years

• ATV Covers: 2 Years
• Snowmobile Covers: 2 Years
• The Standard Motorcycle Cover: 2 years
• The VIPS Motorcycle Cover: 2 years
• The Waterproof Motorcycle Cover: 2 Years

If you are unsure about the warranty of a product, please call us at 888-872-6855<.

We offer a variety of outdoor covers that excel in different environments so that you're covered no matter what the weather. Your cover should withstand just about anything Mother Nature can dish out, however there are a few instances where you should be more alert and take extra precautions.

High Winds: If you are located in a high wind area, make sure to tie down your cover using the grommets provided. You should also purchase a Cable & Lock kit for added security. Do not rely solely on the elasticized bottom of you cover to provide maximum protection from strong wind.

Freezing Weather: In unusual circumstances, a layer of ice may form between your vehicle and the cover. This layer of ice must be thawed before removing your cover. You may expedite this process by pouring warm water over the cover and gently lifting it as the ice begins to melt. If any resistance occurs, repeat the process.

Extreme Heat: In areas that are known for very high temperatures and harsh sun (like Southern California, Arizona, and Texas), some cover fabrics are not appropriate or effective and may in fact melt under such circumstances. Before purchasing a cover, speak with an Empire Sales Representative about which cover would be right for you.

No, our covers will accommodate your mirrors without pocketing them. This ensures that you will get maximum durability from your cover, as mirror pockets are unneccessary and are usually the first part of a Truck Cover to deteriorate or rip.

For more questions concerning orders, shipping, customer service and hours of operation, please visit our Frequently Asked Questions. If you have a question that was not answered please give us a call at 888-872-6855.